In large shopping malls and supermarkets, hygienic conditions are directly related to the size of passenger flow, and the sanitation of the ground is the most important thing, but it is difficult to maintain the sanitation of the ground. Traditional manual washing, sweeping, and mopping cannot effectively clean up and deal with the dust and dirt generated every day, and just wipe the stains evenly on the ground. If you want to clean thoroughly, you need to invest a lot of manpower and material resources. Cleaning equipment The hand-push floor washing machine is produced in response to the needs of the high-efficiency era. The hand-push floor washing machine integrates watering, cleaning, and sewage collection, and can quickly complete the cleaning of the ground. Even in the rainy weather, it can quickly maintain the cleanliness of the ground. health.
Cleaning equipment suitable for floor cleaning in shopping malls and supermarkets can be selected according to the needs of the cleaning area and the limitations of the cleaning area: small hand-push scrubbers, automatic hand-push scrubbers, driving scrubbers, large driving scrubbers, Fully automatic washing machine, etc., then Dike cleaning equipment will talk about the advantages of automatic washing machine or washing car and other cleaning equipment compared with manual cleaning:
1. Cleaning advantages: For a long time, the traditional manual methods in shopping malls, supermarkets and other industries cannot clean the dirt on the ground. After cleaning the ground, the remaining water stains on the ground need to evaporate slowly or use a hair dryer to dry the ground quickly, which will make a lot of water flow. Increased indoor humidity is not easy to disperse in the indoor space, and it is easy to corrode equipment, facilities, and vehicles for a long time; however, cleaning equipment such as hand-push scrubbers are integrated with scrubbing and drying, which can quickly clean the ground. The moisture on the surface is sucked away and taken away from the site, so that the ground can be dried quickly without secondary pollution.
2. Cleaning efficiency: Manual cleaning is not only inefficient and takes a long time, but also wastes a lot of effective human resources. Unclean cleaning affects the working environment. In general urban workshops, vehicles, forklifts, forklifts, and staff enter and exit the production workshop. It is easy to bring in sand, dust, and oil from the outside and bring it to every corner of the workshop, causing extensive wear on the epoxy floor; the city first chooses cleaning equipment such as a washing machine or a washing machine for cleaning, which can effectively improve the quality of the epoxy floor. Working environment, these cleaning equipment can simulate the whole cleaning process, which is an automatic cleaning method of cleaning and absorbing sewage. A hand-push scrubber can be used by 8 workers, which greatly reduces labor costs and management costs. You can walk directly after washing the floor, greatly reducing the standby time and improving work efficiency, avoiding the situation that manual cleaning is not in place. Compared with cleaning equipment and manual cleaning, its importance in urban cleaning is self-evident.
3. Cleaning area: The hand-push washing machine can reach more than 1,500 square meters per hour, and the cleaning area of the driving washing machine can reach more than 5,000 square meters. Of course, these are theoretical areas. It is no problem to clean the open ground. The current limitation of the automatic floor washing machine is that it can only clean the channel for the city. For the bottom of the machine tool and the place where the workbench is relatively low, generally a large-volume floor washing machine or floor washing car Unable to go in for cleaning. At this time, you can consider using a small single-wiping machine for cleaning, and then use the squeegee of the water suction machine to reach in to absorb water, and cooperate with the operation to clean, the effect is very good.
Fourth, the cleaning equipment used for cleaning, such as hand-push washing machine, driving washing machine, driving washing machine, automatic washing machine, etc., one is for the treatment of garbage and dust, and the other is for the treatment of sewage. The cleaning equipment is In order to improve the harsh environment and improve the living and working environment, the mechanical equipment designed conforms to the ergonomic design in use, conforms to environmental protection and energy saving, conforms to the green and clean era, and conforms to the principle of economic cost.
5. Cleaning scope: common ground types in shopping malls, manufacturing workshops, and warehouses are: cement floor, cement hardened floor, epoxy floor (epoxy floor, epoxy floor), wear-resistant floor, floor paint, ring Oxygen self-leveling floor, epoxy resin floor, epoxy anti-static floor, epoxy anti-corrosion floor, epoxy resin mortar floor, anti-static floor, acrylic court, PVC floor, emery wear-resistant floor, anti-skid floor Flats, anti-corrosion and mildew-proof floors, FRP floors, colored sand floors, etc., should have scientific cleaning management methods, using mechanized cleaning and maintenance methods, which is conducive to cost control and benefit improvement, and is an indispensable cleaning helper in modern society , It is an important embodiment of our environmental management level and service level.
Post time: May-12-2023